GOING FOR A RWC APPOINTMENT? MAKE SURE YOU TICK THE CHECKLIST.

RWC  CHECKLIST

Not sure if your car would pass a Roadworthy Inspection?

Roadworthy requirements in Victoria are designed to keep all road users safe and to protect unwary buyers from buying vehicles that may not be safe to drive for various reasons. TGS Classic and Muscle Cars can help you with this.

Bring your car in to our well equipped workshop or Book a Roadworthy Inspection Online


Check out the VicRoads website for more information.
​
If you want to be able to pass a Roadworthy Examination it helps to understand what the mechanic conducting the vehicle inspection will be considering when deciding if the car is roadworthy.


HERE IS A QUICK CHECKLIST, LET'S GO THROUGH EVERY STEP:

Brake & Braking Systems

Brakes and warning systems are an essential safety feature of all vehicles and must be in good working order to pass a roadworthy examination 

• All brake components must be functioning correctly, be mounted securely and appropriately located 
• 
  
• All brake components must be free from visible wear, distortion or damage 
• 
  
• Vehicle parking and emergency brakes must be functioning correctly 
• 
  
• Park brakes must be capable of keeping the vehicle stationary on any grade of hill up or down 
• 
  
• Brake lights (warning signs) must be fitted correctly and functioning 
• 
  
• Car horn must be working correctly ( warning signs) 
• 
  
• Brake systems must be free of leaks 
• 
  
• Brake linings must not be worn down to the wear indicators

Chassi and Vehicle Body

• An absence of any condition which could cause structural failure or otherwise affect safe operation
• 
  
• A sound floor, free of obstructions or any condition which could hamper safe operation
• 
  
• All latch mechanisms in correct working order, inc all door, boot, lid (utes), bonnet, hatch and tailgate latches
• 
  
• Bumper bars which eliminate sharp corners or protrusions must be securely fitted
• 
  
• Towbars (when present) should be in good condition and correctly fitted
• 
  
• Vehicles with a tray type body require suitable mudflaps for the vehicle type

General Condition Inspection

• Steering wheels should be suitable to the vehicle and any covers must be secure
• 
  
• All pedals and steering or control wheel knobs should be in working order and not hamper performance
• 
  
• A suitable rear view mirror must give a clear view to the rear of the vehicle 
• 
  
• There must be one or more effective horns or warning devices able to sustain a steady sound of constant pitch
• 
  
• Any car or vehicle built after 1 July 1988 must have a functioning speedometer displaying speed in km/h
• 
  
• Suitablle Fuel (filler) caps must be in use, be adequatelysecure and seal correctly
• 
  
• Plastic emergency or temporary fuel caps are not acceptable and will not pass inspection

Lights, Reflectors and Signals

Light requirements vary greatly with vehicle type, but as a general rule all vehicles must be fitted with;

• Headlights(Lights & Reflectors must be in good condition)
• 
  
• Brake Lights(aka stop lamps)
• 
  
• Front and rear position lights
• 
  
• Turn signal lamps (aka indicators or blinkers)
• 
  
• Number plate light/s
• 
  
• All Lights must be in reasonable working order
• 
  
• All lights must be correctly placed and securely fitted
• 
  
• All lenses or light covers must be clean and free of damage
• 
  
• All light covers and lenses need to be of the correct colour (not faded)

Seatbelts & Seats

Seatbelts need to be present and free of damage or obstructions whilst being secure and structurally sound. All seats, partcularlt the drivers seat, must be in good condition and fitted securely to the vehicle.

• Seatbelts must be present
• 
  
• Seatbelt webbing must be firmly secured
• 
  
• Seatbelt must not display any cuts, damage, wear, knots or fraying
• 
  
• All seats must be secure and structurally sound
• 
  
• Seats may not have protrusions or jagged edges
• 
  
• The drivers seat must not have any defect which could impede driving ability
• 
  
• Seat sliders must be functioning correctly and free of any looseness
• 
  
• If present head restraint must be secure and in a sound condition
• 
  
• No seatbelt component can be modified in any way 

Suspension & Steering

The vehicle must drive straight without wandering or pulling left or right when driving straight ahead. All steering components must be securely and correctly mounted and free from damage or excessive wear, including dust and grease seals. 

• Power steering fittings should be free of oil leaks
• 
  
• Adequate clearance between suspension components and vehicle body
• 
  
• All joints, pivots and bushes must be in good condition
• 
  
• Dust and grease seals must be deemed as suitable
• 
  
• All wheel bearings and mounts need to be in good condition
• 
  
• Shock absorbers and struts must be securely mounted
• 
  
• Shock & Struts must not display any sign of leaks 

Wheels and Tyres 

• Tyres must display a tread depth of 1.5mm (min) at any point on the tread reasonably expected to contact the road (other than at tyre tread indicators)
• 
  
• Where tread wear indicators are present, tyres cannot display sufficient wear that such indicators contact the road surface
• 
  
• Tyres and rims must be of compatible size
• 
  
• In the case of retreaded tyres, the ID of the retreader must be clearly marked
• 
  
• Retreaded tyres must display the word "retreaded" in addition to relevant markings as required by the Australian standard
• 
  
• Wheels, rims and tyres must be free of cracks or any other damage that could cause failure of the tyre, wheel or rim
• 
  
• The wheels and rims must cannot be out of balance or otherwise damaged, dented or buckled
• 
  
• You cannot have a "temporary use" spare tyre fitted as a road wheel
• 
  
• If you have spoke wheels, all spokes must be intact, straight, fitted and laced or tensioned correctly
• 
  
• When facing straight ahead the wheels and tyres must not project beyond the width of the mudguards
• 
  
• Tyres & Wheels must not contact any part of the vehicle during any combination of steering or suspension functions
• 
  
• Wheels must be have the correct type and number of studs, nuts (or both where required) and be securely fitted

Windows & Windscreen
​
All windows need to be free of damage and must not be altered to the extent that it hampers safe vehicle operation. Impairment of a drivers vision of the road as a result of significant cracks, chips or scratches may cause the car to fail a roadworthy test. Minor wear and tear is sometimes deemed acceptable provided the drivers vision is not impacted. Windscreens with tinting included included during manufacture are acceptable. Tinting applied via coatings or tint films post manufacture is unacceptable.
To pass a Certificate of Roadworthiness vehicle windows should;

• Be free of any cracks, chips, scratches or damage which compromises driver view or safe operation
• 
  
• Have no alterations (including tinting) which might impact a drivers ability to see the road and other users at all times
• 
  
• Have Correctly fitted and properly functioning windscreen wipers
• 
  
• Include windscreen washer jets which are correctly positioned to effectively keep the windshield clear of rain, dirt or debris
• 
  
• Not have a windscreen where the primary vision area is tinted to more than 70% (where manufactured after 1971)
• 
  
• Not have a windshield which has tinting applied as a coat or tint film in the primary vision area

Make sure to book your appointment online by clicking here:

BOOK ONLINE NOW

Make sure to subscribe to   our  newsletter: